Spectra Watermakers MPC-5000 owner manual Product Water Plumbing

Product Water Plumbing

Product water tubing is 1/4”(6mm) on the Ventura 150 models. See the Parker tube fitting as- sembly diagram next page. Product water is pre-plumbed from the membrane into the electric diversion valve. The diversion valve will reject product water into the overboard brine stream until good quality is measured by the MPC-5000 control. Product water is then diverted into the fresh water tank.

Product to tank.

Route the product water into the top of the tank, or a tee in the water tank fill hose.

DO NOT! feed into a vent line, a manifold or the bottom of the tank. Make sure that there is no restriction in this piping.

Accepted Product

Water Outlet

Automatic Valve

Check Valve

Rejected product outlet

Product from membrane

RotoFlow Meter

Salinity Probe

Product Diversion Valve Manifold

10