4.Pressure Regulator Knob (14): The Pressure Regulator Knob enables the operator to adjust output pressure to the pneumatic tool being used. To increase the amount of air pressure to the tool, turn the Pressure Regulator Knob clock wise. To decrease the amount of air pressure to the tool, turn the Pressure Regulator Knob counterclockwise. (See Figure D.)
5.Tool Pressure Gauge (13): The Tool Pressure Gauge measures the pressure level of air flowing to the pneumatic tool being used, and is adjustable using the Pressure Regulator Knob (14). (See Figure D.)
6.Quick Coupler (11): The Quick Coupler connects to the air output hose which, in turn, connects to the pneumatic tool being used. To connect an air hose, push in on the Quick Coupler. To disconnect the air hose, pull back on the Quick Coupler collar. (See Figure D.)
PRESSURE
REGULATOR
KNOB
(14)
TOOL
PRESSURE TANK
GAUGE PRESSURE
(13)GAUGE
(13)
PRESSURE SWITCH
(57)
QUICK COUPLER
(11)
SAFETY VALVE
(10)
FIGURE D
OPERATING INSTRUCTIONS
1.
CAUTION! Always make sure the Pressure Switch (57) of the Air Compressor is in its “OFF” position and the unit is unplugged from its electrical outlet prior to performing any service, maintenance, or changing accessories on the Compressor.
SKU 94355 | For technical questions, please call | PAGE 10 |
