EON518S Specifications
System Type: | Self powered 18", | |
Frequency Range | 36 Hz - 130 Hz | |
Frequency Response (±3 dB): | 42 Hz - 100 Hz | |
Crossover Frequency: | 120 Hz (HPF switchable on outputs) | |
System Power Rating: | 500 W continuous, 1000 W peak | |
Distortion: | Less than 0.1% at rated power | |
Maximum SPL: | 129 dB | |
Signal Indicators: | Limit: Red LED indicates input overload condition | |
Signal: Green LED indicates signal present | ||
| ||
Input Gain: | - infinity to +4 dBu | |
Input Impedance: | Nominal 20k Ohms (balanced) | |
Polarity: | 0° or 180° phase shift | |
LF Driver: | 1 x JBL 268G 460 mm (18”) Differential Drive® integrated | |
woofer with dual voice coils, 4 ohm load | ||
| ||
Enclosure: | 18 mm, plywood | |
Suspension / Mounting: | 36 mm pole socket on top | |
Finish: | DuraFlex™ finish | |
Grille: | Powder coated perforated steel with acoustically transparent black screen backing. | |
Input Connectors: | Balanced XLRs with loop through (stereo) to balance XLR satellite outputs. | |
¼” Speaker level input. | ||
| ||
XLR Pin Assignments: | Pin 2 (+), Pin 3 | |
AC input: | 120 – 230v, 50/60 Hz | |
Dimensions (H x W x D): | 617 x 569 x 652 mm (24.3 x 22.4 x 25.7 in) | |
Net Weight: | 29.5 kg (65 lb) |
Block Diagram
11