Harman-Kardon FL8350 owner manual Operation, Loading Discs, Disc-Handling Notes

Operation

10

Loading Discs

To load a disc, first turn the FL8350 on using the Power Switch 1. Note that the Status Mode Indicator 2will turn green and the Information Display î will illuminate. The word disc will flash in the Information Display, and the disc tray will automatically turn clockwise so that the FL8350 can sense which, if any, of the disc positions already have a disc.

To load a disc, first press the Open/Close button !a, taking care to make cer- tain that the space in front of the drawer is not obstructed. Note that if the drawer is blocked when attempting to open it, it will automatically close within five seconds to protect the mechanism.

Load discs in the tray with the printed (label) side facing up towards you. Make certain that the disc is centered in the tray. Either 5" (12cm) or 3" (8cm) discs may be used. When a 3" (8cm) disc is played, it should be carefully centered within the smaller ridges on the tray. Only one CD may be placed in any position at a time. When a 3" (8cm) is played, DO NOT place a standard 5" (12cm) disc over the smaller disc.

Labeled surface

Recorded surface

Note that each disc position has a number embossed in the plastic tray. This corresponds to the position this disc will occupy for playback and program- ming. To make it easier to identify each disc’s position, the disc position number for the holder space that is in the center of the disc tray will also appear in the Information Display when the disc drawer is open.

To rotate the disc tray to another position, press the Disc Skip button *p. The tray will revolve clockwise to the next slot, and the Information Display will indicate the position number for the slot in the middle of the tray.

To close the disc drawer, press the Open/ Close button !a. When the drawer closes, the disc that was last in the center position on the tray will be readied for play. Its number will appear in the Information Display, and a flashing red line will surround the icon for that disc. The icons for all other tray positions that have a disc will be surrounded with a blue line. If the center disc position is empty when the drawer is closed, the unit will search for the next position with a disc loaded, and place that spot in the ready mode.

The drawer may also be closed and the FL8350 put into play by pressing the Play button $h. This will put the disc in the center position into the Play mode. To close the drawer and play a specific disc, press the Disc Select button (

bcorresponding to the tray position number for the disc you wish to play.

When the disc drawer closes, the Information Display will briefly display the disc number, the total number of tracks on the disc and the disc’s total

running time. After five seconds, the dis- play will indicate the disc number that is in the play position, both by a flashing red line surrounding the disc’s icon and the wording in the display, such as disc 5. The total number of tracks on the disc will illuminate at the far right side of the display.

1 2 3 4 5

1 2 3 4 5

6 7 8 9 10

DISC TRACK MIN SEC 11 12

To remove a disc from the player, press the Open/Close button !a. The drawer will open, allowing the discs to be removed. Press the Disc Skip button *

pto rotate the disc carousel tray to reach discs that may be covered. When a disc does not occupy a numbered tray, and the sensor detects no disc present, the disc number will drop from the display.

Upon placing a disc in the unoccupied tray, the disc number will reappear when detected by the sensor mechanism.

Disc-Handling Notes

When loading or unloading discs, it is best to hold them by the edges.

While Compact Discs are very reliable, rough handling may damage them. Avoid scratching the bottom (non-printed) side of discs, or any handling that will leave fingerprints.

To avoid damage to the disc and player, always seat discs so that they are centered in the tray.

Do not lift the player while the disc tray is opening or closing, as this may cause the discs to unseat from the tray and possibly jam.