Harman-Kardon HD720 owner manual Operation, Normal Play

Operation

10

Normal Play

To play a disc, first turn the HD720 on using the Main Power Switch 1. If the unit has previously been turned on with the Main Power Switch, but then turned off using the remote control, the Status Mode Indicator 2will glow amber. In that case, the HD720 may be turned on using the Power On button bon the remote control.

To load a disc, first press the Open/Close button &, taking care to make certain that the space in front of the drawer is not obstructed. Note that if the drawer is blocked when attempting to open it, it will automatically close within five seconds to protect the mechanism.

Load the disc in the tray with the printed (label) side facing up. Make certain that the disc is centered in the tray. Either 5" or 3" discs may be used. When a 3" disc is played, it should be carefully centered within the smaller ridges inside the cassette drawer.

After a brief pause, the Information Display will show the total number of tracks on a disc and the total running time of the disc. The number of tracks will be shown in a large number within the display, and all of the available tracks will light in the smaller boxed number indicators at the bottom of the display.

			TRACK								MIN	SEC
												TOTAL
1	2	3	4	5	6	7	8	9	10	11	12

NOTE: When there are more than 20 tracks on a disc, the OVER Ý indicator will light in the bottom right corner of the display.

NOTE: If a disc with CD-ROM data or other information that is not compatible with a CD player is used, the display will indicate NO AUDIO.

When a mixed CD Audio and CD-ROM disc is played, the HD720 will automati- cally bypass the data portion of the disc and search for the CD Audio section.

To play all of the tracks on the disc in order, press the Play button 4j. A play indication ßwill appear in the Information Display *.

To play all of the tracks in random order, press the Random button #m. The RANDOM indicator will light when that mode is in use.

You may also select a specific track directly by entering the track number via the Numeric Controls c. Simply enter the track number by press- ing the buttons that correspond to the desired track and the unit will automati- cally find it and begin play. Note that when a two-digit track number is being entered, the second digit of the number must be pressed within two seconds of the first digit.

Labeled Surface

To retract the drawer back into the player after loading a disc, press the Open/Close button &.