Harman-Kardon HK3250 manual Recalling The Preset Stations, Recording With A Cassette Deck, English

HK3250 engelsk 11/01/98 14:28 Side 8

RECALLING THE PRESET STATIONS

Select the channel number of the desired preset station with the UP or DOWN TUNE/PRESET or NUMERIC buttons on the remote control unit.

SCANNING THE PRESET STATIONS IN SEQUENCE

1Press the PRESET SCAN button on the remote control unit to listen to the preset stations.

2The receiver will start scanning the stations in the preset sequence and each station is received for 4 seconds.

3At the desired station, press again to stop scanning.

NOTES:

•If the end of the frequency range is reached during the auto or manual tuning, tuning will continue from the opposite end.

•When FM stereo broadcasts are poor, select the FM mono mode with the SEEK/STEREO button so that the AUTO indicator goes out.

•When memorizing a new station, the previously memorized station on the same channel number is cleared.

•In the event of a power failure or when the receiver is disconnected from the AC outlet, the memorized stations are maintained for approximately 2 weeks.

RECORDING WITH A

CASSETTE DECK

1Select the program source to be recorded with the INPUT FUNCTION SELECTOR buttons.

2Start recording on the cassette deck.

3Play back the desired program source.

•The volume, balance, bass and treble settings have no effect on the recording or dubbing.

•When recording is performed on a 3-head cassette deck, the recorded sound can be monitored through the speakers by pressing the TAPE MONITOR button to ON.

ENGLISH

8