MOUNTING OPTIONS
Satellites and Surrounds
The satellite speakers may be placed on
a shelf.
They may be wall- mounted using the supplied brackets.
Wall-Mounting
Unscrew the bolt that attaches the black shelf stand to the bottom of the speaker. Store the stand and bolt in a safe place, in case they are needed for a future installation.
Wall Plate
Mount the wall- bracket attachment plate on the wall in the desired loca-
tion. If possible, position the
speakers so that the mounting screws (not included; use size #8) may be installed directly into a wooden wall stud. If that is not possible, use optional wall anchors that are rated to support at least
Referring to the speaker connection instruc- tions on pages 9 through 12, thread the appropriate speaker cable through the open- ing in the bottom of the wall plate, and then through the back of the bracket, as shown in the diagram. The bracket has two openings
Wires to Speaker
Terminal Cover
| Wire |
Overhead | From |
Wall | |
View | Plate |
on top: a round screw hole, and an arc- shaped opening in front of it. The speaker cable should be threaded through the arc- shaped opening, not the screw hole.
Attach the bracket to the wall plate by insert- ing the tab at the top of the wall plate into the slot on top of the bracket and snapping the bracket onto the wall plate.
Thread the cable through the round opening in the terminal cover, and then insert the speaker wires into the terminals on the underside of the speaker, remembering to observe the correct polarity (see page 9). Place the terminal cover over the opening on the underside of the speaker so that it fits flush against the speaker and covers the ter- minals, with its round opening exposing the threaded insert. The bracket fits through the round opening in the terminal cover.
Wall Plate
Insert the supplied bracket bolt up through the bottom of the bracket and terminal cover, and screw it into the threaded insert on the underside of the speaker. The bolt should be snug, but not so tight as to prevent the bracket from pivoting.
The
allW
23mm or 3/4"