Harman-Kardon HKTS 5 OM owner manual Introduction, Four wall-mount brackets

INTRODUCTION

Introduction

Thank you for purchasing the Harman Kardon HKTS 7, with which you’re about to begin many years of listening enjoyment. The HKTS 7 has been custom-designed to provide all the excitement and power of the cinema experience in your own living room. While sophisticated electronics and state-of- the-art speaker components are hard at work within the HKTS 7, hookup and operation are simple. Color-keyed cables and connec- tions, and simple controls make the HKTS 7 easy to use.

To obtain maximum enjoyment from your new home theater speaker system, we urge you to take a few minutes to read through this manual. This will ensure that connec- tions to your receiver or preamp/processor and amplifier or other external devices are made properly. In addition, a few minutes spent learning the functions of the various controls will enable you to take advantage of all the power and refinement the HKTS 7 is able to deliver.

If you have any questions about this prod- uct, its installation or operation, please contact your dealer, the best local source of information.

Description and Features

The HKTS 7 is a six-piece home theater speaker system that includes a 10-inch, 100-watt, bass-reflex powered subwoofer; four identical, 2-way satellite speakers for use in the left and right front and rear speaker positions; a voice-matched, dedicated, dual-driver center speaker; shelf stands and wall-mount brackets for the four satellites; and all of the speaker cables you need to connect your speakers to your receiver or preamp/processor and

The HKTS 7 subwoofer is easy to connect to your system, since it’s equipped with a special subwoofer input for use with equip- ment that has a dedicated subwoofer con- nection that carries a low-frequency output. It also includes stereo speaker-level inputs and outputs for connection to older receivers and processors that do not have a line-level subwoofer output. Other conve- niences include a level control, high-cut (low-pass) filter switch and phase switch for fine-tuning bass response to suit your listening environment and taste, and an efficient switching system that senses the presence of an audio signal and automatically switches the unit from Standby mode to Active mode. Shelf stands and wall-mount brackets are included for the satellite speakers, and optional HTFS 2 floor stands are available separately from your Harman Kardon dealer. Harman Kardon invented the high-fidelity receiver fifty years ago. With state-of-the-art features and time-honored circuit designs, the HKTS 7 is a perfect complement to

a Harman Kardon receiver or any home theater system.

■Complete home theater speaker system

■Speakers are magnetically shielded for placement near video monitors

■Fully color-coded cables and connections simplify setup

■Both line- and speaker-level inputs for use with most audio components

■Subwoofer input offers superior- quality bass reproduction when used with any digital audio system that incorporates bass management or programmable crossovers

One powered subwoofer

Four satellites for left, right and surrounds, with color-key stickers (shown with included shelf stands attached)

Four wall-mount brackets

One 15' RCA cable for connection to sub- woofer (purple)

Three 20' speaker cables for connection to front satellites (red and white) and to center speaker (green)

amplifier. The speaker cables and speakers all use a color-coding system to conform to the CEA standard. The color-coding system minimizes confusion, especially when the HKTS 7 system is used with a Harman Kardon receiver.

Included

	Two 40' speaker cables for connection from
One center channel speaker	receiver to rear satellites (gray and blue)

4INTRODUCTION