Harman-Kardon HKTS 8 Dolby* Digital or DTS or Other, Digital Surround Mode Connection, Front

SPEAKER CONNECTIONS

Dolby* Digital or DTS® (or Other	Front
Digital Surround Mode) Connection
USE THIS INSTALLATION METHOD FOR	Left
DOLBY DIGITAL, DTS OR OTHER DIGITAL
SURROUND PROCESSORS:

Use the line-level input jack marked SUB

∞for the Low-Frequency Effects channel. Connect this jack to the subwoofer output or LFE output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure you’ve configured your surround sound processor for “Subwoofer On.” The front left, front right, center and surround speakers should all be set to “Small.”

When all connections have been made, plug the AC power cord on the subwoofer into an AC outlet.

Surround

Left

Center

Front

Right

SUB-TS8 SubwooferLINE LEVEL IN

SUB R L

Front		Front
Left		Right
	SUB/LFE
	Out
Surround		Surround
Left	Center	Right
		Surround
	Surround Back	Right

Receiver

Surround

Back

10 SPEAKER CONNECTIONS