![](/images/new-backgrounds/1019725/197259x1.webp)
Unpacking and Installation / Rear Panel Connections
3
Unpacking and Installation
The carton and shipping materials used in protecting your new amplifier were specially designed to cushion it from the shocks and vibration of shipping. We suggest that you save the carton and packing materials for use in shipping if you move or if the unit ever needs repair.
To minimize the size of the carton in storage, you may wish to flatten it. Carefully remove any staples used to close carton seams; carefully slit the tape on the bottom and collapse the carton. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.
When positioning the amplifier in its final location, make certain that it has adequate ventilation on all sides, as well as on the top and bottom. Do not place CDs, record jackets, owner’s manuals or other paper on top of, or beneath the unit, or in between multiple amplifiers in a stack. This will block the air flow, caus- ing degraded performance and a possible fire hazard. If the unit is to be enclosed in a cabinet or rack, make certain that there is adequate air circulation, with means provided for hot air to exit and for cool air to be brought in.
Rear Panel Connections
C AU T I O N |
RISK OF ELECTRIC |
SHOCK . DO NOT OPEN |
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
MODEL NO. PA5800
HARMAN KARDON NORTHRIDGE CALIFORNIA, USA
SERIAL NO.
|
|
|
|
|
| MADE IN USA |
|
E160812 |
|
|
|
|
|
|
|
596D |
|
|
|
|
|
|
|
LISTED |
|
|
|
|
|
|
|
AUDIO SYSTEMS |
|
|
|
|
|
|
|
|
|
|
|
|
|
| POWER AMP |
|
|
|
|
|
|
| TRIGGER IN |
CHANNEL ONE (FRONT RIGHT) | 1 | CHANNEL TWO (SURROUND RIGHT) 2 | CHANNEL THREE (FRONT CENTER) | 3 | CHANNEL FOUR (SURROUND LEFT) 4 | CHANNEL FIVE (FRONT LEFT) 5 | |
SPEAKER |
| SPEAKER | SPEAKER |
| SPEAKER |
| SPEAKER |
| IN | IN |
| IN | IN |
| IN |
4 OHMS |
| 4 OHMS | 4 OHMS |
| 4 OHMS |
| 8 OHMS |
|
|
|
|
|
| AC INPUT | AC 12OV/60Hz 340W |
Á | ª | £ | ¢ |
ÁSpeaker Outputs: Connections from these terminals should be made to the appropriate speakers in your system.
ªAudio Inputs: Connect the outputs of the PT2500, ADP303 or other surround processor, preamplifier or decoder to these jacks.
£AC Power Cord: Connect this plug to a
¢Remote Amp Trigger In: Connect this jack to the matching trigger output on a PT2500 or other compatible device to have the PA5800 automatically turn on when the device is activated. See page 4 for additional details.
Note: To assist in the installation of this product, the numbers used in this diagram appear in the manual to guide you to rear panel connections.