Manuals / Harmar Mobility / Personal Care / Mobility Aid

Harmar Mobility AL065 manual Installing the Vehicle Wiring Harness

Models: AL065

1 10
Download 10 pages 47.03 Kb
Page 3
Image 3

Installing the Vehicle Wiring Harness

Important Note: IMPROPER WIRING IS THE #1 CAUSE OF PROBLEMS IN THE OPERATION OF A VEHICLE LIFT. FOLLOW THE WIRING INSTRUCTIONS CAREFULLY

Located in the hardware package is the vehicle wiring harness. The harness is manufactured to, and complies with the SAE J1128 requirements. The wire harness is approximately 23 ft. long and will accommodate most vehicles.

1.Unwind the harness and lay it flat. One end of the harness has a black plug. This is the lift end of the

harness and goes to the back of the vehicle.

2.Begin routing the wiring harness at the vehicle battery. Attach the black wire to the negative

terminal on the battery. Do not attach the red wire yet.

3.Run the wiring harness under or when possible through the vehicle, back to the trailer hitch. Always locate the wiring harness where it can not be snagged by road debris and away from the vehicles gas tank.

4.If the harness is too long for the vehicle, coil the excess wire and secure it to the vehicle frame with

the supplied tie wraps. Do not cut or shorten the harness. Secure the plug about even with the end of the hitch receiver tube.

5. Attach the red wire to the positive terminal on the battery.

Important Reminder: Never attempt to attach the wire harness to a secondary power source. The lift requires direct connection to the battery.

Caution: When the installation requires the wiring harness be run on the underside of a vehicle, route the harness away from the exhaust system, brake lines, fuel lines, gas tank, pinch points, and sharp edges. Locate the wiring harness where it can not be snagged by road debris.

Manufacturer’s Recommendation: Schedule a routine maintenance visit with the end user. Harmar recommends the lift be greased in the applicable areas, and the wire harness connections be checked for corrosion, and/or decay, as such conditions are normal due to environmental changes.

3

Page 2 Page 4
Page 3
Image 3
Harmar Mobility AL065 manual Installing the Vehicle Wiring Harness
Page 2 Page 4

AL065 specifications

Harmar Mobility AL065 is a state-of-the-art vertical platform lift designed to enhance accessibility for individuals with mobility challenges. This exceptional product is perfect for both residential and commercial settings, offering an efficient vertical solution that allows seamless movement between different levels, especially where traditional ramps may not be feasible.

One of the standout features of the AL065 is its robust construction, equipped with a durable aluminum frame that ensures longevity and stability. This design not only provides strength but also keeps the lift lightweight, making installation easier. The lift's platform has a generous size, accommodating various mobility devices such as wheelchairs and scooters, making it versatile for different users.

The AL065 emphasizes safety, boasting a range of features including a non-slip platform surface and automatic safety barriers that prevent accidental falls. Its advanced control system is user-friendly, featuring a simple-to-operate control panel that can be accessed from both the upper and lower levels of the lift. Additionally, the lift ensures safety during operation with its emergency stop button and optional battery backup, allowing continued functionality even during power outages.

In terms of technology, the Harmar AL065 incorporates advanced hydraulic systems that provide smooth lifting and lowering actions. This technology minimizes noise during operation, contributing to a more pleasant experience. The lift is also designed with a weather-resistant finish, making it suitable for both indoor and outdoor applications.

The compact design of the AL065 allows for installation in tight spaces, and with its range of height options, it can accommodate different building specifications. Furthermore, the lift adheres to all applicable safety standards, ensuring peace of mind for users and installers alike.

Overall, the Harmar Mobility AL065 is a reliable and efficient solution for improving accessibility, combining functionality with user-centric design. Its modern features and technologies make it an excellent choice for those in need of a vertical lift, promoting independence and ease of movement within any environment. Whether for home use or in commercial settings, the AL065 stands out as a leader in mobility solutions.