Johnson Mirage User’s Guide | Section One - Introduction |
Quick Start
The JT50 and JT100 come with 21
For those of you who prefer to burn now and read later, we’ve included this Quick Start section to get you up and running.
Making Connections:
Connect your instrument to the input jack on the top panel of the Mirage JT50 or JT100.
Optional Foot Controller Connections:
Connect the optional JT3 footswitch or J8 foot controller to the designated jacks on the rear panel.
Mod / | Delay | Reverb | Bank Up |
Pitch |
|
| (Hold) Tuner |
Bank Down
Warning: Do not connect anything but the J8 foot controller to the J8 controller jack on the rear panel of the Mirage. Doing so may damage the device.
Apply Power:
Turn the Master Volume on the JT50/JT100 all the way down. Turn the power switch to the on position. Gradually increase the master volume control to achieve the desired level.
Select Preset:
Use the Bank Select knob and the Preset 1, 2, and 3 buttons to audition the different presets. Once you have found presets that suit your taste, you can alter the sounds to meet your specific needs.
Each of the effects will have specific knobs, which will vary the values of their associated parameters. The amp section has a Gain, Bass, Mid, Treble, and Preset Level knob, as well as a 12 position knob to select your Amp Type. The Mod/Pitch Effects section has a Speed/Level and Depth/Gate knob along with a 7 position knob to choose from the 6 types of Effects or Effects bypass. The Delay section has a Level/Time, and Feedback knob and includes a
2