Hasbro 60-044 manual T T E R I E S, Inserting the Batteries

INSERTING THE BATTERIES

To insert the batteries, remove the battery compartment cover at the back of the game.

(To remove cover, push in direction of the arrow.) Insert two “AA”/LR6 batteries (not included), making sure to align “+” and “—” as shown.

TO ENSURE PROPER FUNCTION:

–Do not mix old and new batteries.

–Do not mix alkaline, standard or rechargeable batteries.

–Battery installation should be done by an adult.

–Non-rechargeable batteries are not to be recharged.

–Rechargeable batteries are to be removed from the toy before being charged (if removable).

–Rechargeable batteries are only to be charged under adult supervision (if removable).

–Only batteries of the same or equivalent type as recommended are to be used.

–Batteries are to be inserted with the correct polarity.

–Exhausted batteries are to be removed from the toy.

–The supply terminals are not to be short- circuited.

RESET BUTTON:

After battery insertion, the RESET switch may be pushed only if the game doesn’t work properly. (Use a ball-point pen.) The display should appear as shown in the diagram at the right.

B A T T E R I E S

13