Using a Phillips/cross head screwdriver,
loosen screw in battery compartment cover
(screw stays attached to cover) on the bottom.
Insert 4 X 1.5V “AA” or LR6 size alkaline
batteries. Replace cover and tighten screw.

HELPFUL HINTS

For the best performance, follow these guidelines:
1. Keep background noise low - for best results play with FUNKY FURBY in a quiet room.
2. FUNKY FURBY performs best when you sit between 12 and 18 inches away from it,
facing it directly.
3. Wait until FUNKY FURBY has finished speaking and moving before giving a command.
4. Talk in a normal tone of voice, the way t hat you would talk to a friend. Pronounce all the
syllables of each word clearly.
5. Shouting does not improve voice recognition.
6. Keep the command card handy, and remember that FUNKY FURBY will respond only to
the exact commands on the card.
7. FUNKY FURBY is a state-of-the-art, electro-mechanical, robotic toy. The mechanical sound
you hear when FUNKY FURBY moves is normal.
8. Use only 4 x 1.5V “AA” or LR6 size ALKALINE batteries with FUNKY FURBY.
9. If FUNKY FURBY begins acting erratically, please change the batteries with all new
alkaline batteries.

CLEANING INSTRUCTIONS

To clean FUNKY FURBY, gently brush the hair with a clot h or soft brush
to loosen any dirt. Then use a slightly damp cloth to remove stains.
DO NOT PUT IN THE WASHING MACHINE
DO NOT SUBMERGE IN WATER
DO NOT GET WET EXCEPT A DAMP CLOTH ON THE FUR
TO PREVENT STAINING THE FUR, WIPE DIRT OFF IMMEDIATELY
IF FUNKY FURBY GETS WET, REMOVE THE BATTERIES AND DRY THE FUR
ONCE COMPLETELY DRY, REPLACE THE BATTERIES
DO NOT USE DETERGENT OR STAIN REMOVERS ON THE FUR
Prevent spills of food and beverage on the unit.
Do not throw or kick the product, and do not push sharp objects through the
speaker openings.
IMPORTANT NOTE:
If FUNKY FURBY begins to function improperly, switch the ON/OFF
switch to the “OFF” position, and then move back to the “ON” position.
High temperature will destroy the unit.
Do not leave unit in direct sunlight.

To Replace Batteries

CAUTION:
1. Always follow the instructions carefully. Use only batteries specified and be
sure to insert item correctly by matching the + and – polarity markings.
2. Do not mix old and new batteries or standard (carbon-zinc) with
alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short-circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference,
move it away from other electrical equipment. Reset (switching off and back
on again or removing and re-inserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of
batteries. Always remove from the product before recharging. Recharge
batteries under adult supervision. DO NOT RECHARGE OTHER TYPES
OF BATTERIES.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference.
Batteries should be replaced by an adult.
910