Apple 627, 1230 user manual Automatic Document Feeder at a glance

5Remove the plastic cap from the port on the back of the scanner and put it in a safe place.

Remove the	Insert the
plastic cap.	connector
	cable.

6Plug the cable from the document feeder into the small port on the back of the scanner.

7Switch on the scanner and then switch on your Macintosh.

The scanner makes some sounds as it warms up. After about 20 seconds, the document feeder and scanner are ready to use.

Automatic Document Feeder at a glance

Document guide	Document tray
Document	Paper-size mark
feeder cover

Document		Document exit tray
feeder
connector	Attachment brackets	Paper-height limit mark
cable

116 Chapter 9