Image quality problems
My images have smudges and smears all over them.
mThe scanner glass and the scanner cover may need cleaning. Use a clean, soft, damp cloth to wipe the glass and cover clean.
Scanned images have consistent vertical streaks through them, even though I’ve cleaned the scanner glass.
mYou may have a hardware problem.
See your authorized Apple service center.
My scanned images are of generally poor quality.
mYou may be letting too much light in.
Make sure the scanner cover is closed when you scan.
Problems with the Automatic Document Feeder
When I try to use the Automatic Document Feeder, the Feeder command in the Source
mThe small cable that connects the document feeder to the scanner may have come loose.
Switch off the scanner and your Macintosh and connect the cable. Switch the scanner on again, wait about 20 seconds, and then switch on your Macintosh.
My Automatic Document Feeder is not feeding originals when I try to scan them.
mYou may not have set the software source correctly.
Make sure you’ve selected Feeder in the Source
mThe document feeder may not be able to find the originals. Make sure you’ve placed the originals in the input tray.
I get a message that says the computer can’t see the document feeder.
mYou may not have set the software source correctly.
Make sure you’ve selected Feeder in the Source
158 
Appendix B
