7Remove the plastic cap from the port on the back of the scanner and put it in a safe place.
Remove the | Insert the |
plastic cap. | connector |
| cable. |
8Plug the cable from the adapter firmly into the small port on the back of the scanner.
9Switch on the scanner and then switch on your Macintosh.
The scanner may make some sounds as it calibrates and warms up. After about 20 seconds, the adapter and scanner are ready to use.
Handling film
To protect your valuable film from fingerprints, grease, and so on, wear gloves. Most photography supply stores sell gloves designed for handling film.
Using the Transparent Media Adapter | 141 |
