The image is reversed.

mThe film is facing the wrong way. Make sure the film is face down.

Color quality is unsatisfactory.

mAll or part of the light correction zone has been obstructed.

If the film is in a film guide, make sure the guide is positioned properly. See “Inserting Film Into a Film Guide for Scanning,” earlier in this chapter.

If you’re not using a film guide for positives, be sure to allow at least .59 inch (15-mm) of space between the top edge of the film and the top edge of the document glass. (The space comprises the necessary light correction zone.)

If you’re not using a film guide for negatives, be sure to allow space for the light correction zone. In addition, be sure to mask the sides of your negatives to avoid overexposure (halation). Use a black opaque material for masking (something similar to the material in the film guides).

mYou may have selected an inappropriate negative film type, producing incorrect colors.

Choose the correct film type. For details, see “Scanning With the Adapter,” earlier in this chapter.

mYou may not have selected an appropriate ColorSync profile for the medium you are scanning.

m Color OneScanner Flatbed for magazines, paper, other opaque originals m Color OneScanner Positive for positive transparencies

m Color OneScanner Negative for negatives

Every time you change from one medium to another, you must select the correct ColorSync profile. Choose ColorSync Preferences from the Image menu. In the dialog box that appears, select the profile you want.

Using the Transparent Media Adapter

151

Page 159
Image 159
Apple 1230, 627 user manual Image is reversed