Wing Ninja Armor Assembly, Build IBA Blaster

AGES 8+

98069/98047 Asst.

WING NINJATM*

WING NINJA ARMOR ASSEMBLY:


6	Remove arms from body. Slots on Q-4 should face down, with waffle-print	7

READY, SET, B-DAFIRE!™*

Assembly required. No tools needed.

#32

area towards the rear. Press wedges on Q-1 and Q-2 into slots on IBA Body.
Flat side of the wedges should be facing the front of IBA Body.)	Be sure wings are firmly
	pushed into Q-4.

WARNING: Do not use B-DAMAN™ launchers or B-DAMAN game boards on tables or other elevated surfaces.

™B-DAMAN launchers/game boards are intended to be used on the floor. Do not lean over the game board when B-DAMAN launchers are in play. B-DABALLS™* may bounce up and hit eye or face.

Back View

•Before assembly and playing, please read instructions. Please keep these instructions for future reference.

•When removing parts from runner frame, ask an adult to help you trim off any excess plastic using scissors or other suitable tool.

•The frame is numbered. Please follow the numbers carefully and make sure you are assembling the right parts.

•Do not remove parts from runner frame until directed to by the instructions.

•Discard plastic bags immediately.

PARTS:

IBA BLASTER™* Front,

IBA BLASTER Back,

Runner Frame Parts,

1Spring,

1B-DABALL™*, Target Pin, Decals.

8	Insert Q-3 and press	9	10
	Insert Q-3 and press
	in until it clicks.
		Label	Label

BUILD IBA BLASTER:

B - DAMAN DATA:

Install spring.

IBA BLASTER

ready for battle!

Label

Helmet

11	12	Push tabs on helmet into slots on head.	13
		Push tabs on helmet into slots on head.

Your

WING NINJA

is ready!