Document ID: H1 imprint modes.indd - 2005-05-10
H1 IMPRINT MODE
Magazine settings
The last setting is to check that the magazine is programmed to imprint data. This is the default setting of the magazine. Check that the caption “DATA” is shown on the magazine LCD. If this is not the case, slide the lock switch (4) on the right side of the magazine forward to unlock the magazine buttons. Press the mode button (1) repeatedly until the cap- tion “DATA” is shown together with “oFF”. Use either of the change but- tons (2, 3) to change the indication to “on”. Press the rear button again. Slide the lock switch backwards to lock the buttons again.
1 Mode button
2 Change down button
3Change up button
4 Lock switch
Press the 
button until the display shows
Press either of the 
buttons to change to ”on” and press the 
again to store the change.
Magazine is correctly programmed | Magazine is programmed not to imprint |
for data imprint as indicated by the | data |
|
-icon
www.hasselblad.com
