Cisco Systems DGS-1224T manual Key Masked password matching the Radius Server Key

Figure 42 – QoS > 802.1X Setting

By default, 802.1X is Disabled. To use EAP for security, select Enabled and set the 802.1X Global Settings for the Radius Server and applicable authentication information.

Authentication Port: sets primary port for security monitoring. Default is 1812.

Key: Masked password matching the Radius Server Key.

Confirm Key: Enter the Key a second time for confirmation.

TxPeriod: Sets the number of seconds that the switch waits for a response to an EAP-request/identity frame from the client before retransmitting the request. Default is 24 seconds.

ReAuthEnabled: This Enables or Disables the periodic ReAuthentication control. When the 802.1X function is Enabled, the ReAuthEnabled function is by default also Enabled.

50