Toshiba PDR-M71 105, Select the desired operation, Confirm Press this to confirm the settings

Print Information (continued)

Select the desired operation.

[CONFIRM]: Press this to confirm the settings.

1Press or to select [CONFIRM], and press ENTER.

2After confirming the settings, press ENTER.

3Select [END] and press ENTER.

[CLEAR ALL]: Press this button to clear all settings.

1Press or to select [CLEAR ALL], and press ENTER.

2To clear all settings, select [EXECUTE] and press ENTER. To cancel [CLEAR ALL], select [CANCEL] and press ENTER.

3To remove the write-protection, select [YES] and press ENTER.

4Select [END] and press ENTER.

Memo

•When the SmartMedia™ already contains a DPOF information file, the message “RECREATE DPOF FILE?” is sometimes displayed. Note that if you select [YES], the file is overwritten, and the information of the existing DPOF information file is erased. The same also applies when the DPOF information file is overwritten on a personal computer and values not supported by this camera were set.

•Images set in the DPOF format are automatically protected. Write-protection cannot be removed by regular methods (➲ Page 108)

•You can specify up to 99 prints or up to 999 frames in a single SmartMedia™. The maximum number of prints you can specify in a single SmartMedia™ is limited to 10000.

-105 -

Ready	Getting
Photographs	Taking
BackImages	Playing
Images	Erasing
Functions	Handy
Applications	Other
Information	Additional