- 131 -

Getting
Ready
Taking
Photographs
Playing
Back Images
Other
Applications
Additional
Information
Erasing
Images
Handy
Functions
Troubleshooting (continued)
Causes
The mode dial has been changed
to another setting.
The flash is set to Suppressed
Flash mode.
You pressed the shutter button
while the flash was charging.
The camera is set to Suppressed
Flash mode.
The batteries are exhausted.
The subject is too far away.
No image saved in the folder
The lens is not clean.
The image is out of focus.
The SmartMedia is
write-protected.
The frame is protected.
The SmartMedia is
write-protected
Camera malfunction.
The mode dial is not at the correct
position.
The camera is in the Auto Power
OFF mode.
See Page
P.56
P.118
P.57
P.25
P.92
P.56
P.54
P.34
P.108
P.102
P.34
P.110
Remedy
Set the mode dial to the correct setting.
Set the flash to Auto, Red-Eye Reduction or
Forced Flash mode.
Wait until charging is completed before
pressing the shutter button.
Set the flash to Auto, Red-Eye Reduction or
Forced Flash mode.
Replace with new batteries.
Move closer to the subject.
(about 2.6 ft (0.8 m) ~ 9.7 ft (3.0 m) (WIDE
side setting))
Select the folder containing images to play
back.
Clean the lens.
Set the FOCUS photography according to
the distance up to the subject.
Remove the write-protection.
Remove the write-protection.
Cancel the DPOF setting.
Remove the write-protection.
Turn the power off and remove the
batteries once, and try again.
Set the mode dial to the correct setting.
Press the POWER button again to turn the
camera on.
Problem
I cannot use the flash to
take pictures.
The flash will not charge.
The playback image is
too dark even though I
used the flash.
Images cannot be
played back.
The playback image is
blurred.
I cannot format the
SmartMedia.
I cannot erase all the
frames.
Nothing happens when I
use the buttons and
switches.