Installing the batteries (continued)

Battery Wear

When the power is ON, the remaining battery power is displayed on the LCD monitor and the status display.

LCD Monitor Status Display

Remaining Battery Power

 

 

Sufficient battery power

Batteries are partially used.

Battery power is nearing exhaustion.

Replace with new batteries.

Batteries completely exhausted. (Camera will not turn on.)

Replace with new batteries.

Memo

When you use the camera for the first time or if you have left the camera for a long time without the battery loaded, set the date (Page 111).

If the batteries are exhausted and need replacement, do not connect the AC adapter. It may cause an incorrect display of remaining battery power.

Battery power measure is based on amount of power required for camera LCD, flash, photography and playback. Status Display may show batteries exhausted if there is not enough power required for normal operation, even if there is some small power left in the batteries.

About the battery duration time

The following shows the number of frames/time capable of continuous photographing and playback on condition of using new alkaline batteries.

The battery duration time may vary depending on environmental temperature, image size, image quality or using frequency of zoom.

In photography mode (using strobe every time in a normal temperature) When LCD monitor is ON ......... approx. 240 frames

When LCD monitor is OFF ....... approx. 300 frames

In playback mode (slideshow continuous playback time) approx. 110 min.

- 27 -

Ready

Getting

Photographs

Taking

BackImages

Playing

Images

Erasing

Functions

Handy

Applications

Other

Information

Additional

Page 29
Image 29
Toshiba PDR-M71 instruction manual Battery Wear, LCD Monitor Status Display Remaining Battery Power