Taking Photographs Continuously (Burst Photography) (continued)

Compose the picture, press the shutter button down halfway, and press it down fully. Page 40

The maximum number of photography that can be taken continuously is three.

If you release the shutter button before the camera captures three images, the camera will stop taking pictures at that point.

After photography is finished, the LCD monitor automatically turns ON.

Pressorto verify the image.

You will be allowed to choose which image to save before it is recorded to the SmartMedia™.

The number of photographs stored in the memory is displayed at the bottom right of the screen, and the number in green is the image currently displayed.

The green indication also moves as you move the image to be displayed.

Useorto select the recording method.

The camera is set to erase all images immediately after photography.

1 [

] : This setting is for saving and erasing the selected image.

 

Press

or to select the image, and press ENTER.

 

The red

mark appears under the selected image. To cancel selection of the image,

press ENTER again.

2[ ] : This setting is for saving all images. Press ENTER.

All images are selected, and all images with turns into a red .

This item cannot be selected if there is not enough space on the SmartMedia™.

3[ ] : This setting is for erasing all images.

Press ENTER.

1to 3 can be combined regardless of their order to set saving and erasing of images.

-73 -

Ready

Getting

Photographs

Taking

BackImages

Playing

Images

Erasing

Functions

Handy

Applications

Other

Information

Additional

Page 75
Image 75
Toshiba PDR-M71 instruction manual Taking Photographs Continuously Burst Photography, Press or to verify the image