Alpine CDA-7892E Display Angle Adjustment Audio Mute Function, Displaying Time, Setting Time

When the hour has been adjusted, press the Rotary encoder.

Display Angle Adjustment Audio Mute Function

Movable display

The movable display may be adjusted to 3 different angles depending upon user preference.

1 Press the ANGLE 89 button to adjust the angle of the movable display.

NOTES

•The display will close a half minute after the ignition key is turned to the OFF position.

•The adjusted angle of the display is stored in memory. There is no need to re-adjust the angle when the power is turned back on.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Adjusting Volume/Balance (Between

Left and Right)/Fader (Between Front

and Rear)/Defeat

1 Press the MODE (Rotary encoder) button repeatedly to choose the desired mode.

Each press changes the modes as follows:

→BALANCE → FADER → DEFEAT SUBWOOFER*← VOLUME ←

Volume : 0 ~ 35

Balance : L15 ~ R15

Fader: R15 ~ F15

Subwoofer: 0 ~ +15

NOTES

•If the MODE button is not pressed within 5 seconds after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER mode, the unit automatically returns to the VOLUME mode.

•∗ When the subwoofer mode is OFF, its level cannot be adjusted.

2 Turn the Rotary encoder until the desired sound is obtained in each mode.

By setting Defeat ON, previously adjusted settings of BASS, Treble will return to the factory defaults, but MX will be turned off.

Activating this function will instantly lower the volume level by 20 dB.

1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing the MUTE button again will bring the audio back to its previous level.

Displaying Time

1 Press the CLK (clock) button repeatedly until the time is displayed.

Each press changes the modes as follows:

Radio mode
	→	Radio frequency	→	Clock priority	→	TITLE mode
				mode
CD Player/Changer modes

→Playingmode time → Clockmode priority → DISCmodeTEXT *

		TRACK	*
TITLE mode	←			←
		TEXT mode

NOTES

•Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.

•When the power is off but the ignition key is on, press the CLK button to display the time.

•∗ The display above is shown with a CD-TEXT compatible changer connected.

Setting Time

1 In the Clock priority mode, press and hold the CLK (clock) button for at least 3 seconds while the time is displayed. The time indication will blink.

2 Turn the Rotary encoder to adjust the hours while the time indication is blinking.

3

4 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder.

5-EN