Alpine CDA-7892E owner manual Multi-ChangerSelection, Controlling CD Changer Optional, 20-EN

Press the BAND button to activate the CD Changer Selection mode.

CD Player Operation

Multi-Changer Selection

SOURCE BAND

FDisc Select buttons (1 through 6)

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to the CDA-7892E if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the CDA-7892E, the CD Changer will be controllable from the CDA-7892E.

Using the KCA-400C (Multi-Changer Switching device) or the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by the CDA-7892E.

See the Multi-Changer Selection section on this page for selecting the CD Changers.

NOTES

•The controls on the CDA-7892E for CD Changer operation are operative only when a CD Changer is connected.

•The “Changer” indicator illuminates when a CD Changer is connected.

•The DVD changer (optional) is controllable from the CDA- 7892E as well as the CD changer.

1Press the SOURCE button to activate the CHANGER mode. The display shows the disc number and track number.

NOTE

The source indicator varies depending on the connected source.

2Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.

NOTES

•After selecting the desired disc, you can operate in the same way as for the CDA-7892E CD player.

For details, please see the CD Operation section.

•If the "FUNC" indicator is illuminated the Disc Select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press the “F” button. This changes the “D” indicator to “d.” Then press the desired Preset button. With the “F” button activated, the Preset buttons 1 to 6 will represent discs 7 to 12 respectively.

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA- 410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press the SOURCE button to activate the CD Changer mode.

2

3 The CD Changer Selection mode remains active for 8 seconds after step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display will show “NO CHGR .”

4 To operate the selected changer, see “CD Player

Operation” section.

NOTE

For further details about the external input (AUX) when using KCA-410C, see ”Setting the AUX Mode (V-Link)" on page 13.

20-EN