Basic Operation
SOURCE BAND | Rotary encoder | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MX | T. CORR |
Bass Focus
The time difference between the
1 Press the T.CORR button to select the Bass Focus mode.
→Bass Focus mode → Time correction mode Normal mode ←
2 Press the BAND button to select the
NOTES
•Any manual time correction adjustments will also affect corrections made in Bass Focus.
•Time Correction mode is automatically canceled if no buttons are pressed within 15 seconds.
Example of Steps 2 and 3 Setting
(1)After entering corrections for the front (left and right) speakers in STEP 15, the time difference is 1.5 ms for both
1.5ms1.5ms
∗
(2)After entering corrections for the left (front and rear)
speakers in STEP 15, the time difference becomes 3.0 ms∗ for the front left speaker and 1.5 ms for the left rear speaker.
∗Because the time difference was already set to 1.5 ms for the front left speaker in STEP 1, the additional correction in STEP 15 makes the time difference of the front left speaker 3.0 ms.
FL | FR |
| FL | FR |
→ | RR | → | RL | RR |
RL |
| |||
Front |
| Left | ||
speakers |
|
| speakers |
|
FL | FR ← |
| FL | FR ← |
RL | RR |
| RL | RR |
3.0ms
1.5ms 1.5ms
1.5ms
1.5ms
∗
Rear | Right |
speakers | speakers |
3 Turn the Rotary encoder to adjust the
4
5 After setting, press the T. CORR to return to the normal mode.
Tips
*Subwoofer speaker.
Delay (turn the rotary encoder) the audio signal to the front (left and right) speakers to make the apparent position of the subwoofer to be at the front. In doing this, the apparent position between the front (left and right) speakers and subwoofer will appear equal to the driver. After performing above, you can change the positions of left and right speakers by delaying the time .