MP3 Changer Operation (Optional)
Setting the Range of MP3 File
Selection
BAND
g DN f UP SETUP | M.I.X. SCAN |
M.I.X. (Random Play)
Perform the following operation within 5 seconds after the F button has been pressed and the FUNC indicator has lit.
1 Press the M.I.X. button in the play or pause mode. The files on the disc will be played back in a random sequence. After all files on the disc have been played back, play will shift to the next disc.
To cancel M.I.X. play, press the M.I.X. button to turn off the M.I.X.
NOTE
If you set FOLDER in the “Setting the Range of MP3 File Selection” section on this page, and select M.I.X., the files in a folder will be played back in a random sequence. However, after all the tracks in a folder have been played back, play does not shift to the next folder.
Scanning Programmes
You can set the range of MP3 file selection to “entire disc contents” or “folder contents only.”
1
2 Press the f UP or g DN button to select DISC/ FOLDER (file selection range).
3 Press the BAND button to toggle the mode between DISC ALL and FOLDER.
•DISC ALL : plays all the files on one disc
•FOLDER : plays files in the selected folder only.
NOTES
•The initial setting at the factory is DISC ALL.
•The range of MP3 file selection applies to REPEAT, M.I.X. and SCAN modes only.
In normal mode, the unit plays all files on a disc even when you set the range of MP3 selection to “folder contents only.”
Press the SETUP button to set the selected mode.
Perform the following operation within 5 seconds after the F button has been pressed and the FUNC indicator has lit.
1 Press the SCAN button to activate the Scan mode. The first 10 seconds of each file will be played back in succession.
To stop scanning, press the SCAN button to deactivate the Scan mode.
NOTE
If you set FOLDER in the “Setting the Range of MP3 File Selection” section on this page, the first 10 seconds of each file in a folder will be played back.