Cisco Systems DGS-1224T specs

•Exit: To exit the SmartConsole Utility.

View includes: View log and Clear Log functions, which provide trap setting list operations.

•View Log: To show the event of the SmartConsole Utility and the device.

•Clear Log: To clear all log entries.

Option includes: Refresh Time and Group Timer functions.

•Refresh time refreshes the monitoring time of the device. Choices include 15 secs, 30 secs, 1 min, 2 min and 5 min for selecting the monitoring time intervals.

•Group Timer establishes the intervals (in seconds) that the Web-Smart Switch will be discovered in the SmartConsole Utility Discovery List.

NOTE: If the Group Timer is set to 0, IGMP snooping must be disabled or else the Web-Smart Switch will not be discovered.

19

Image 23

Cisco Systems DGS-1224T manual

Contents

Building Networks for People LinkDGS-1224T Table of Contents Page Page Terms/Usage Purpose Introduction Gigabit Ethernet Technology Fast Ethernet Technology Ieee 802.1Q Vlan Switching Technology IEEE802.1Q Vlan Features Technical Specifications Ieee 802.3 compliance Flash Memory Physical & Environment Temperature Storage TemperaturePower consumption Emission EMI and Safety Certifications Unpacking Installation Attach the adhesive rubber pads to the bottom Rack Mounting Attach the mounting brackets to the Switch Connecting Network Cable AC Power Front Panel LED Indicator Rear Panel Rear panel of the Switch Understanding LED Indicators Power and System LEDs Blinking Supported web browsers Installing the SmartConsole Utility Menu Toolbar SmartConsole Utility FeaturesPage Monitor List Definitions of the Discovery List featuresDiscovery List View trap Definitions of the Monitor List functions and terms Trap information Device Setting This space has been intentionally reserved for notes Firmware Upgrade Web-based Utility Login Log in screen Tool Menu Tool Menu Tool Menu Configure Backup and Restore Tool Menu System Reboot Setup Menu System Trap Setting System System Setting System Trap Setting System Port Setting System Port Setting System Snmp Setting System Snmp Setting System Password Access Control System Password Access Control Configuration 802.1Q Vlan Configuration Jumbo Frame Configuration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Example VIDs Configuration Igmp Snooping Configuration Trunking Configuration Igmp Snooping Configuration Page Configuration Igmp Router port Settings Configuration Igmp Multicast Entry Table Configuration Spanning Tree Configuration 802.1D Spanning TreePage Configuration Port Mirroring Configuration Port Mirroring Security Safeguard Engine QoS 802.1p Default Priority Security Broadcast Storm Control Security Safeguard Engine Security Broadcast Storm Control Security 802.1X Setting QoS 802.1X Setting Page Security Static Mac Address Security Mac Address Table Static MAC Security Dynamic Forwarding Table Security Mac Address Table Dynamic Forwarding Table Monitoring Statistics Monitoring Statistics Monitoring Port Statistics