Model OFE/OFG/OEA/OGA-341, 342

3-7. BASIC OPERATIONS AND PROCEDURES-

(12 Button Controls/Autolift)

To load product directly into the shortening on Auto-lift

(Continued)

fryers, lower empty basket(s) into the shortening by

 

pressing

, load with product, then press

 

the product button to start the Cook Cycle.

 

Raise the basket(s) on Auto-lift fryers anytime during a

 

Cook Cycle by pressing

. The Timed Cycle

 

then pauses.

 

 

10.At the end of the Cook Cycle, a tone sounds and the

display shows “DONE”. Lift the basket from the shortening. (On auto-lift fryers, the basket(s) automatically rises out of the shortening.) To stop the

“DONE” beeper, press either , or the product button.

A different product can be selected during the first minute of cooking, in case the wrong product button was pressed.

11.The display shows either dashes, or the product name, depending on the Special Program setting, SP-10. If a Quality Time was programmed, the controller alternately shows the product selected and the Quality Time remaining in minutes. If a different product is selected during the Hold Cycle, the display only shows the product selected.

12.At the end of the Hold Cycle, a tone sounds, the display flashes “QUALITY”, and the product it was

timing. Press and release .

In the Cook Mode, when "FILTER SUGGESTED, shows in the display, the operator has the option to filter at this time, or to continue cooking. But, if the operator continues cooking, a filter lockout will occur within the next Cook Cycle, or two.

When "FILTER LOCKOUT" , then "YOU *MUST*

FILTER NOW........” shows in the display,

is the only

button that functions, until the unit is filtered.

 

3-12

903

Page 12
Image 12
Henny Penny OFG, OFE, OGA-341, OEA manual Basic Operations and Procedures, When Filter Lockout , then YOU *MUST