Henny Penny OEA, OFG, OFE, OGA-341 manual Operating Controls, Button Controls

Model OFE/OFG/OEA/OGA-341, 342

3-2.	OPERATING CONTROLS		This section provides operating procedures for the Henny
	12 BUTTON CONTROLS		Penny 340 series open fryer with 12 button timer controls.
			Read sections 1, 2, and 3, and all instructions before
			operating the fryer.
			Figure 3-2 shows the function of the 12 button timer control.
Fig.	Item	Description	Function
No.	No.
3-2	1		This LED lights when the control calls for heat,
			and the burners come on and heat the shortening
3-2	2	Digital Display	Shows the shortening temperature, the timer countdown in
			the Cook Cycle, and the selections in the Program Mode;
			press the INFO button to display the temperature of the
			shortening; if the temperature exceeds 425°F (218°C), the
			display reads "E-5", “FRYER TOO HOT”
3-2	3		Once the fryer is out of the Melt Mode, this LED
			lights, signaling the operator that the shortening temperature
			is not at the proper temperature for cooking product
3-2	4		This LED lights when the shortening temperature is within 5°
			of the setpoint temperature, signaling the operator that the
			shortening temperature is at the proper temperature for
			cooking product
3-2	5		Used to display the current shortening temperature, the
			setpoint temperature, as well as cooking performance, and
			other information such as, filter use, time of day, etc; in the
			Program Mode, it steps back to the previous parameter
3-2	6 & 7		Used to adjust the value of the currently displayed setting
			in the Program Mode

903 3-3