Henny Penny OFE, OFG, OGA-341, OEA Use care to prevent burns caused by splashing of hot shortening

Models: OEA OGA-341 OFE OFG

1 22
Download 22 pages 19.08 Kb
Page 17
Image 17
Use care to prevent burns caused by splashing of hot shortening.

Model OFE/OFG/OEA/OGA-341, 342

3-12. CHANGING THE FILTER Change the filter envelope after 10-12 filterings or

ENVELOPEwhenever it becomes clogged with crumbs. Proceed as follows:

The filter union could be hot. Wear protective glove or cloth, or severe burns could result.

Use care to prevent burns caused by splashing of hot shortening.

1.Move the main power switch to the OFF position.

2.Disconnect the filter union and remove the filter drain pan from beneath the frypot.

3.Remove drain pan cover from drain pan and lift the screen assembly from the drain pan.

4.Wipe the shortening and crumbs from the drain pan. Clean the drain pan with soap and water. Thoroughly rinse with hot water.

5.Unthread the suction standpipe from the screen assembly.

6.Remove the crumb catcher and clean thoroughly with soap and water. Rinse thoroughly with hot water.

7.Remove the filter clips and discard the filter envelope.

8.Clean the top and bottom filter screen with soap and water. Rinse thoroughly with hot water.

Be sure that the filter screens, crumb catcher, filter clips and the suction standpipe are thoroughly dry before assembly with the filter envelope or water will dissolve the filter paper.

9.Assemble the top filter screen to the bottom filter screen.

10.Slide the screen into a clean filter envelope.

903

3-17

Page 17
Image 17
Henny Penny OFE, OFG, OGA-341, OEA manual Use care to prevent burns caused by splashing of hot shortening