WinTV-NOVA-TD
dual tuner
Quick Installation Guide
© 2008 Hauppauge Computer Works ·
Hauppauge Computer Works, Ltd. | Tech Support: (+44) 0207 378 0202 |
10 Borough High Street | Telephone: (+44) 0207 378 1997 |
Bank Chambers | Fax: (+44) 0207 357 9171 |
London, UK, SE1 9QQ | support@hauppauge.co.uk |
www.hauppauge.co.uk |
|
Hauppauge Computer Works, Inc. | Tech Support: (+1) 631 434 3197 |
91 Cabot Court | Telephone: (+1) 631 434 1600 |
Hauppauge, NY 11788 | Fax: (+1) 631 434 3198 |
www.hauppauge.com |
|
Hauppauge Digital Asia, Pte. Ltd. | Tech Support: (+65) 276 4412 |
Blk 1093, Lower Delta Road | Telephone: (+65) 276 9163 |
Tiong Bahru Industrial Estate | Fax: (+65) 276 9167 |
Singapore 169204 |
|
www.hauppauge.com.sg |
|
Included in this package
●
●USB extension cable
●TV antenna with IEC connector
●TV antenna with MCX connector
●Aerial 'Y' splitter
●Remote control
●Installations
·WinTV Application
·WinTV Utilities
●This installation guide
1. Connecting the WinTV-NOVA-TD
Please ensure that Windows XP or Windows Vista is correctly installed and started before connecting the
To install, locate a free USB 2.0 port (normally located at the side or back on the computer). Plug the
2.0port. You can use a USB extender cable to locate the WinTV-
Note: if you plug the device into a different USB socket, you will need to reinstall the
2. Connecting the Aerial
It is recommended to connect to a roof top aerial during the first time installation as this may pro- vide a better signal quality then the provided portable antenna. You will need to ensure that you are located in a area that has Digital Terrestrial coverage.
Please visit www.dtg.org.uk/retailer/coverage.html
The
3. Install the WinTV Drivers and Applications
N ote: If you have any
When you attach the WinTV-
NOVA, the Found New Hardware
Wizard will appear.
Click on Cancel.
Insert your WinTV Installation
N ote: If the autorun does not start, browse to the files on the disc and double
click on the file called 'Setup'.
In the installation window click on Step 1: Install WinTV Drivers.
A blue screen will open which will begin installing and updating the drivers for your product.
Once complete, a message appe- ars in the bar. If this message is
Drivers have been updated Successfully, click on the bar to exit. If the message reports an error, check the connection of your WinTV, or contact our tech- nical support.
Next, click on Step 2: Install WinTV and select your language from the list. The setup window should appear and begin to auto- matically install the WinTV appli- cations.
N ote: During the installati- on, other installation
wizards may open, we recom- mend following the instructions in each of these and installing with the default options availa- ble.
N ote: For advanced users you can select the 'Custom
Installation' which will allow you to modify the list of appli- cations that are installed by default.
Once the WinTV installation is complete, click OK then Exit in the window "Hauppauge WinTV Installation CD". You should now be back at your Windows desktop.
Page 1
4. New WinTV®v6 Application
To start the WinTV application double click on the WinTV icon.
When you run WinTV for the first time, a message will appear ask- ing you to scan for tuner chan- nels now; please ensure that the TV antenna is connected, click YES.
Select your country location, for instance, select United Kingdom and then, select Scan.
The scanning process for
Note: If you have attached an antenna and do not receive any digital TV channels, either use a stronger antenna (a roof top antenna is recommended for best reception) or try to
add a TV channel manually.
Click Close when finished.
Page 2
Adding a TV channel manually
If the scan did not succeed, you can add a channel manually by enter- ing the LCN number for your local transmitter. Enter your post code in this link:
In the WinTV Channel Manager, click on Sources and
Diversity Tool
Increase reception on
You can use
For this, click on Start / All pro- grams / Hauppauge WinTV and
Diversity Tool and select 'Use in Diversity Mode'. This disable the Dual Tuner function. Click OK and restart your computer for your changes to take effect.
| Page 3 | ||||
|
|
|
|
|
|
Place the antenna in a suitable |
|
|
|
| |
|
| Plug your roof top aerial or |
| ||
location, when you receive at |
|
| portable TV antenna into |
| |
least one channel, go to the |
|
| the WinTV’s TV IEC |
| |
WinTV channel manager, click |
|
| Connector. |
| |
on Sources and |
|
|
|
|
|
to see Signal Status. |
|
|
|
|
|
Unplug one of the antennas and |
|
|
|
|
|
move the other one to have the |
|
|
|
|
|
best quality level in Signal |
|
|
|
|
|
Status. Unplug this antenna and |
|
|
|
|
|
| Plug the portable TV antenna or |
|
| ||
plug in the other one to now |
| your roof top aerial, using the IEC |
|
| |
optimize this antenna. Antennas |
| to MCX connector, into the |
|
| |
must be a slight distant apart |
| WinTV’s TV MCX Connector. |
|
| |
for best result. |
|
|
|
|
|
The minimum signal level to engage the Diversity mode is just 3 blocks on each antenna. When plugging the two antennas, the quality level should then increase.
Watch TV
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Minimise |
|
|
| |
|
|
| TV Mode |
|
|
|
|
| Channel up |
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Volume |
|
|
|
|
| Channel down |
|
|
|
|
| Remove toolbars |
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| Close | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| no title mode |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
| Always on Top |
|
|
|
|
| Channel surf |
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| Last channel |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
| Mute |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Freeze picture |
|
| Click your right mouse button |
|
|
|
| |||||||
| Pref: Configuration |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| in the TV window to remove |
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
| Setup Menu |
|
|
|
|
|
|
|
|
|
|
|
| toolbars. Click again to |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| restore toolbars. |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
| CFG |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Configure Snapshot |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| Current TV channel |
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| Click your right mouse |
|
|
|
|
|
|
|
|
|
| |||||
| Snapshot viewer |
| Snapshot Still |
| button here to see the |
|
|
|
|
|
|
|
|
|
| |||||||||
|
| window: |
| capture |
|
| channel selector |
|
|
|
|
|
|
|
|
|
| |||||||
Double click on each |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| thumbnail to see |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| image full size.Click |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| and hold your right |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
mouse button to see |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| image options. |
|
|
| Pause |
| Record |
| Playback |
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
Changing channels
You can change channels by using the Channel Up or Channel Down buttons on the WinTV. You can type a channel number (for example:
27)and WinTV will tune to that channel. If the entered channel does not exist, you will see a black window.
You can also right click in the Current TV channel box, where you will see a list of channels. Or type letters (for example: BBC) to access to the list of the channels including these letters.
Page 4
TV Mode
When you click the Full screen TV button, TV will appear full screen on your PC monitor. When finished watching TV full screen, click your right mouse button in the TV window. If you see video with a black box around it, click the Pref button then click TV mode tab. Check the box which says “Allow resolution change”.
"Always on top" Mode
Will always be visable on your Windows desktop on top any applications. To turn on, click the Always on top button. It will turn green. To turn off, click this button again.
A convenient way to use
Pref button
Click the Pref button to open the preferences menu:
View: These are the settings for the On Screen Display of the TV channel and Audio Volume, where you can enable Close Captions (if supported in your system configuration), plus controls for the Toolbar mode (Title mode), NoToolbar mode (No Title) and Full Screen (TV mode).
Movies: Here is where you configure some video and audio settings. You can set the movie record directory (DVCR Record File Path).
Snapshot: Set the size of your captured images, plus single or two field captures for capturing motion or still image video.
Audio: Your audio settings are configured here.
Menu Button
Click the Menu button to open the TV setup menu. Here is the main control bar for TV channels, and duplicate controls for other functions:
Configuration: Duplicate configuration menus for colour, audio, etc.
View: For settings an exact TV window size: 320x240, 640x480 etc.
Page 5
Page 6 | Page 7 | Page 8 |
Record and Pause
There are three buttons to control the watching, recording and paus- ing of TV. Clicking on the Pause button will cause the Pause menu to roll down from the WinTV application, while clicking on the Record button will cause the Record menu to roll down.
Record and Playback
TV Mode 
One Touch Pause 
One Touch Record
The One Touch Pause button prepares the WinTV pausing live video. The One Touch Record OTR) button will start a record session. If you click OTR more than once, a record timer will be set and the record- ing will be done for 15 minutes for each time the OTR button is clicked. For example, if you click the button 3 times, the WinTV will record for 30 minutes.
Click on the One Touch Record button on the WinTV application to open the Record and Playback control bar.
One Touch Record
Display Counter | File |
|
| Rewind |
| Pause |
| Stop |
| Play |
| Forward | ||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| Play forward slow |
| ||||
Clicking the Record button will automatically generate a file name and start recording your audio/video program.
Functions:
●When recording TV, the record button will depressed
●A time counter will be shown indicating the lenght of time of the recording
If you click Stop the time counter will revert back to 00:00:00 The time is specified in a Hour:Minute:Second format.
Stop
Clicking the Stop button will stop the video you are recording or playing back.
Play
Clicking the Play button will playback from disk the last video file created. When playing a video, you can rewind, fast forward, replay 10 sec or skip forward 10 sec using the buttons on the control bar.
Pause
Clicking the Pause button while Playing will pause your audio/video.
Rewind
Clicking the Rewind button will play the video file in reverse. Clicking the Rewind button again will continue the playing of the video.
Fast Forward
Clicking the Fast Foward button one time will fast foward your video at 2X speed. Clicking the Fast Foward button two times will fast foward your video at 8X speed. Clicking the button again will continue playing back at normal speed.
Slow Motion
Clicking the Slow Motion button during playback will cause the video to play in slow motion (at 1/2 speed). Clicking the Slow Motion button again will return the video to normal playback speed.
File button
Clicking the File button opens the File menu. The last file record- ed is listed in the File name box. In the File menu you can:
●Rename your recorded video file: To rename a video file, find the file you would like to rename, highlight it with your mouse, and click and hold the right mouse button. Go down to Rename and then you can type in a new name. Remember: you must keep the MPG extension on the file.
●Play a video file previously recorded: Find the file you would like to play, highlight it with your mouse (one click of the mouse button) and click Open. Then click the Play button.
●Delete recorded video files which you no longer want: Click your right mouse button on the video file once, go down the menu and click Delete.
One Touch Pause
The pause mode allow you to pause the Live TV picture and allows you to use the TimeShift function to rewind and fast forward the TV. Clicking the Pause button on the WinTV application starts the Pause mode. The Pause Menu will drop down.
Time counter | Skip forward 10 sec |
| |
| Fast forward |
| Fast rewind |
| Pause |
| Play |
| Fast forward | |||
|
|
|
|
|
|
| ||||
|
|
|
|
| Slow motion |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
Pause Buffer
The Pause buffer is space on your hard disk where video is stored during the Pause mode. The maximum amount of time which your TV program can be delayed is dependent upon how much storage space you have set for the Pause buffer.
Clicking the Pause button makes WinTV to start recording into WinTV's Replay Buffer. It takes about 10 seconds for the Replay Buffer to be ini- tialized and for Pause to become effective.
Unclicking the Pause button will cause the audio/video program to start playing from the point where the button was originally pushed.
Most WinTV functions are active while in the Pause or Pause Live mode. For example, you can change volume, resize the TV window, go into
While in Pause mode, the Video Position bar shows the amount of the Replay Buffer which is filled with video. For example, if the Video Position indicator shows halfway, it means that half of the Replay Buffer is filled. If you find you cannot Pause as many minutes as you would like, increase the size of the Replay Buffer.
While in Pause mode, the A/V stream is always saved in the Replay Buffer. To stop saving the A/V stream in the Replay Buffer, you must exit the Pause mode by clicking TV mode.
Replay
While in the Pause mode, hitting the Replay button acts like the Instant Replay you see on TV broadcast sporting events: the audio/video goes back in time and you repeat what you have previ- ously seen. Each click of the Replay button causes audio/video to go back 10 seconds. For example, if you want to repeat the audio/video you saw 10 seconds ago, you would click the Replay button once. If you want to see the video you saw one minute ago, you would need to click the Replay button six times.
For extended replay times, you might find it more convenient to grab the Video Position indicator control bar and move it to the left. Once you let the control bar go, audio/video starts to play (it might take a few seconds for the WinTV application to start playing).
You might have to move the Video Position indicator to the left and right to find the desired spot to start replaying audio/video.
While Replaying, your audio/video program continues to be recorded in the Replay Buffer. Therefore, if you have clicked the Replay button 3 times (so that you are replaying the audio/video seen 30 seconds ago), the video you see in the WinTV window will be 30 seconds behind the live program.
Skip Ahead
Clicking the Skip button will skip the video ahead 10 seconds.
Rewind
Clicking the Rewind button while playing video will rewind the recorded video. Clicking the Rewind button again will continue the playing.
Slow Motion
Clicking the Slow Motion button while playing video will play in Slow Motion. Clicking the Slow Motion button again, will continue playing normally.
Fast Forward
Clicking the Fast Forward button one time will fast forward your video at 2X speed. Clicking the Fast Forward button two times will fast forward your video at 8X speed.
Keyboard shortcuts
Sound up - Page Up | Ctrl F - Still image |
Sound down - Page Down | Ctrl M - Default settings |
Plus (+) - Chanel Up | Alt M - |
Minus | |
Ctrl T - Frame TV | Space bar - Take a Snapshot |
Ctrl P - Frame Print |
|
Page 9 | Page 10 | Page 11 | Page 12 |
