Havis-Shields C-TCB-14 manual Tools Required, Hardware, Description, Part #, Sub Assembly, Always

INSTALL INSTRUCTIONS C-TCB-14

UNIVERSAL TELESCOPING COMPUTER BASE

TOOLS REQUIRED:
3/16” Allen wrench	Powered Drill (if necessary)
Ratcheting Wrench	Drill Bit Set (if necessary)
Standard Socket Set

HARDWARE:
QTY	DESCRIPTION	PART #
1	Pole support assembly	CM93071-14W
1	Telescoping pole assembly	CM93072-14
4	¼-20 Nylock nut	GSM30016
4	¼” Flat washer	GSM31005
4	¼ - 20 x ½” Hex head bolt	GSM33000

Always!

Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit

SUB ASSEMBLY:

1.Confirm receipt of all hardware and components.

2.C-TCB-14 offers multiple mounting options.

a.Havis Shields extruded Trak Mount

b.Any flat surface with access to bolt.

3.Mounting option to be determined by installer.

Location to mount to

Trak or flat surface

Pole support

assembly

Telescoping pole

assembly

¼-20 x ½” Hex head bolts, washers & hex nuts

C-TCB-14_INST_8-07