Mount C-TCB-14 to flat surface

INSTALLATION:

1.Mount C-TCB-14 to Havis-Shields Trak Mount:

•Mount console, transmission hump bracket(s), and Trak mount being sure to leave room for C-TCB-14

•Slide (4) ¼-20 x ½” Hex head bolts, (2) in each rail.

•Place Pole support assembly so slots line up with hex head bolts on Trak mount.

•Secure with ¼” Flat washers and nylock nuts.

•Attach optional C-3090 Computer mounting platform to Telescoping pole assembly.

Note: It is recommended to leave all components loose on Trak until exact positioning is determined.

•Exact location to be determined by installer.

•Position C-TCB-14 on floor or other flat surface in vehicle.

•Mark and drill ¼” holes.

•Bolt using ¼-20 x ½” Hex head bolts, washers and nylock nuts.

•Attach optional C-3090 Computer mounting platform to Telescoping pole assembly.

C-TCB-14_INST_8-07