Havis-Shields manual SUB Assembly, Installation, Mount C-TCB-3 into vehicle

SUB ASSEMBLY:

1.Confirm receipt of hardware and components.

2.Loosen or remove front inner and outer passenger seat bolts on vehicle.

INSTALLATION:

1.Mount C-TCB-3 into vehicle:

•Slide pole support assembly between front inner seat base mount and floor of vehicle.

•Loosely attached factory seat bolt.

•Slide universal support brace between front outer seat base mount and floor of vehicle.

•Attach universal support brace and side support brace to welded tab on side of pole support assembly and loosely attach using 5/16-18 Hex head bolt, washers and nylock nut.

•Position assembly on passenger seat base and completely tighten factory seat bolts.

•Mount side support brace to vehicle using ¼” x ¾” Hex head lag bolts. A 3/16” pilot is required.

Note: When mounting side support brace to floor of vehicle, be sure to check for obstructions prior to drilling or lag bolting to floor.

•Mount optional C-3090 computer-mounting platform to telescoping pole assembly using hardware and instructions provided with C-3090.

C-TCB-3-INST-1-05