Havis-Shields DS-PAN-103 installation instructions Installation Instructions, Drawing Number

8 7 6 5 4 3 2 1

D

C

(3X) 1/4-20 X 5/8" BHCS (120 +/-10%IN-LBS)

*USE 3 SCREWS TO FASTEN DOCK DOWN IF POSSIBLE*

B

*RECOMMENDED HOLES

FOR MOUNTING WITH 2 SCREWS*

INSTALLATION INSTRUCTIONS:

1.REMOVE THE 1/4-20 X 5/8" BHCS HOLDING THE MOUNTING BRACKET TO THE REST OF THE DOCKING STATION (THE SCREWS IN THE PLASTIC SIDE-MEMBERS ON EACH SIDE OF THE DOCK). PULL MOUNTING BRACKET OFF OF DOCKING STATION.

2.SET MOUNTING BRACKET ON TOP OF DESIRED SURFACE SO THAT 3 OF THE HOLES ON THE MOUNTING BRACKET LINE UP WITH 3 TAPPED HOLES OF THE MOTION ACCESSORY. (IF 3 HOLES ARE NOT AVAILABLE THEN USE 2.) SEE *RECOMMENDED HOLES* OF THE MOUNTING BRACKET.

3.FASTEN THE MOUNTING BRACKET TO THE MOTION ACCESSORY USING (3X) 1/4-20 X 5/8" BHCS (OR 2 DEPENDING ON AVAILABILITY).

4.PLACE DOCKING STATION OVER TOP OF MOUNTING BRACKET SO THAT THE 2 THREADED HOLES IN EACH FLANGE OF THE MOUNTING BRACKET LINE UP WITH THE 2 HOLES IN EACH PLASTIC SIDE-MEMBER.

5.FASTEN THE DOCKING STATION BACK TO THE MOUNTING BRACKET USING (4X) 1/4-20 X 5/8" BHCS.

6.TIGHTEN ALL FASTENERS TO THE INDICATED TORQUE RECOMMENDATIONS.

(4X) 1/4-20 X 5/8" BHCS (120 +/-10%IN-LBS)

(MOUNTING BRACKET OF

DOCKING STATION)

D

C

B

HARDWARE KIT CONTENTS:

*RECOMMENDED HOLES
FOR MOUNTING WITH
A	3 SCREWS*
	WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,	PRODUCT DESCRIPTION
DRAWING NUMBER:	IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND	THIS PRODUCT IS USED WITH THE PANASONIC
	DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
	OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY	CF-28/29/30 TOUGHBOOK COMPUTERS
D3-0036-IS-G	DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
	ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND	(THE FEATURES OF THIS PRODUCT MAY BE LIMITED
	MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
(SHEET 1 OF 2)	OPERATING VEHICLE.	DEPENDING UPON THE MODEL OF COMPUTER USED.)

PRODUCT I.D.	DATE
DS-PAN-101	01-30-07

PRODUCT NAME

DS-PAN-101 A

DOCKING STATION

WEIGHT: (LBS)

6.6

REV. DATE

1-800-524-990012-07-09

WWW.HAVIS.COM

8 7 6 5 4 3 2 1 F-730-019 REV A