8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
INSTALLATION INSTRUCTIONS:
STRAIN RELIEF
LOCATIONS
D
NOTE: IT IS VERY IMPORTANT TO STRAIN RELIEF ALL CABLES CONNECTED TO THE DOCKING STATION.
1.IF IT IS NECESSARY TO
2.IF STRAIN RELIEF MUST BE REMOVED AFTER INSTALLATION, CUT ZIP TIE PORTION WHERE INDICATED IN ILLUSTRATION A. TO
NOTE: IF ORDERING AN EXTRA SET OF KEYS, REFER TO THE KEY CODE NUMBER STAMPED ON THE KEYS. IF KEYS ARE NOT AVAILABLE, PLEASE HAVE SERIAL NUMBER OF DOCK AVAILABLE BEFORE CONTACTING HAVIS.
D
C
| *ADDITIONAL MOUNTING COMPONENT, | ZIP TIE/PUSH PIN |
| MOTION DEVICE, OR TUBE (NOT SHOWN) |
|
B | IS MOUNTED ON THIS SURFACE* |
|
CUT HERE TO
REMOVE ZIP TIE
| ILLUSTRATION A | |
A |
|
|
| WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER, | PRODUCT DESCRIPTION |
| ||
DRAWING NUMBER: | IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND | THIS PRODUCT IS USED WITH THE PANASONIC |
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY | ||
| DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE | |
| DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN |
|
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND | (THE FEATURES OF THIS PRODUCT MAY BE LIMITED | |
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE | ||
(SHEET 2 OF 2) | OPERATING VEHICLE. | DEPENDING UPON THE MODEL OF COMPUTER USED.) |
|
| |
|
|
|
PRODUCT I.D. | DATE |
PRODUCT NAME
DS-PAN-101
DOCKING STATION
WEIGHT: (LBS)
6.6
REV. DATE
WWW.HAVIS.COM
C
B
A
8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | |
|
