INSTALL WINDOW GUARDS
•Loosely attach upper mounting bracket to window guard using ¼” x ½” tamper proof screws and flat washers. (This step may already be done during shipping)
•Position screen to vehicle as shown in photo #2.
•Make sure you have the window guard centered on the door.
•Mark, drill 1/8” holes, and attach lower mount using #10 x ½” screws as shown in photo #3.
Note: Be sure the upper mounting brackets go under weather stripping and the notches go around the mounting plugs.
Make sure the mounting holes will have metal material to drill into.
•Press firmly against window guard and mark door where the upper mounting brackets are located
•Drill 5/32” holes and mount to door using #10 x ¾” sheet metal screws.
Mount upper bracket using #10 x ¾” screws
Photo #2
Mounting holes. Drill 1/8” holes. Mount using #10 x ½” screws
Press firmly against guard until bracket is under weather stripping. Mark and drill 5/32” holes
Photo #3
