Havis-Shields WGI-D23-1 & 6 manual Tools Required, Hardware, Description, Part #, Subassembly

INSTALL INSTRUCTIONS WGI-D23-1 & 6

INTERIOR WINDOW GUARDS 2006-2007 DODGE CHARGER

TOOLS REQUIRED:
Power drill		T-25 tamperproof torx bit
Drill bits – 1/8”, 5/32”		Phillips screwdriver
HARDWARE:
QTY	DESCRIPTION	PART #
2	Upper mounting bracket	WGI-MB-12-90
8	#10 x ¾” Sheet metal screw	GSM33195
8	#10 x ½” Sheet metal screw	GSM33194
4	¼” x ½” T-25 Tamperproof bolts	GSM34190
4	¼” Flat Washers	GSM31005

Always!

Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit

SUBASSEMBLY:		Photo 1
1.	Bend window guard so it contours the door as
2.	shown in photo #1.
	Determine the proper window guard for each
3.	window.
	If installing aluminum door panels refer to those
	instructions at this time. They will need to be
	installed first.

WGI-D23-INST-10-06