| next window for listening to broadcast and |
| multicast messages. When the access point |
| has buffered broadcast or multicast message |
| for associated clients, it sends the next |
| DTIM with a DTIM Interval value. Access |
| point clients hear and awaken to receive the |
| broadcast and multicast messages. |
|
|
|
|
Maximum burst time | The amount of time the radio will be |
| reserved to send data without requiring an |
| ACK. Adding a burst time should help |
| throughput for 802.11g clients when AP is |
| running in mixed mode. This number is in |
| units of microseconds. A typical value would |
| be 1000 microseconds. When this number |
| is zero, bursting is disabled. |
Enable PSM buffer | PSM stands for Power Save |
| Mechanisms. Turn this on to enable support |
| for stations in power save mode. |
|
|
- 14 -