Getting Connected

1.Find a Location: choose a location to place the access point. Usually, the best place for the access point is at the center of your wireless network, with line of straight to all your wireless stations.

2.Adjust the Antenna: usually the higher the antenna is placed, the better your performance will be.

3.Connect to your local area network: connect a straight or a crossover Ethernet cable to one of the Ethernet port of the access point, and the other end to a hub or switch. (If you are using a straight Ethernet cable, make sure the II-X button is switched right; the other way for Cross Ethernet cable.)

4.Power on the device: connect the included AC power adapter to the

access point’s power port and the other end to a wall outlet. Note: use only the power adapter that provided with the access point. Using a different power adapter may cause permanent damage to the device.

- 4 -