Admin (Administration)

In this Administration page, you can

Change device name.

This is the name that the bridge will use to identify itself to external configuration and IP-address-finding programs. It is okay to leave this blank if you are not using these programs

IP address setting.

Set the IP address for this device or use dhcp to get a ip for this device.

Change password.

The device has no password at default. It is recommended that you set a password to ensure that no one can adjust the device’s settings;

To set/change password:

4.Enter your password to the first password box.

5.Enter the password again in the next box to confirm.

6.Click SAVE to save the setting.

Reboot/Reset this device.

Reboot, the device will re-boot itself and still keep your original settings. You will probably do this if problems occur with this access point.

Reset, the device will reset itself to the factory default settings.

(Note that all your original settings will be replaced by factory default settings.)

- 29 -