Hayter Mowers manual Installing the Fuse Model 447F Only, Charging the Battery Model 447F Only

Installing the Fuse (Model 447F Only)

Your mower comes with a 40-amp fuse that protects the electric starter.

Important: You cannot start the mower with the electric starter or charge the battery unless you install the fuse.

1.Remove the battery cover and the battery and locate the fuse holder (Figure 7).

Charging the Battery (Model 447F Only)

Refer to Charging the Battery in the Maintenance section.

		Figure 7
1.	Screw	3.	Fuse holder
2.	Battery cover	4.	Battery

2.Insert the fuse (from the loose parts bag) into the fuse holder (Figure 8).

Figure 8

Note: Your mower comes with a fuse in the owner’s packet and another fuse in the battery box.

3. Install the battery and the battery cover.

7