2. Squeeze the bulb to increase pressure in the arm cuff. The display will show
thepressure reading within the cuff. Continue pumping until the pressure
reaches approximately 50~60 mmHg above your normal systolic pressure.
If the pressure in the cuff is not high enough, an upward arrow ( )
willdisplay to remind you that you should continue pumping.
3. Sit still and wait for the cuff to deflate and measure your blood pressure.
Itis important to remain still and quiet during measurement.
Anysignificant movement may affect measurement results.
4. When the monitor completes the measurement, it will automatically display
andstore the systolic, diastolic, and pulse reading into memory. The last
60measurement readings will be saved into memory.
The display will indicate a downward arrow ( ). Keep pressing the
airrelease valve above the bulb until all pressure in cuff is released.
5. Press thePOWER button to turn the unit off. The unit will automatically
shutoff after 1 minute if no buttons are pressed.
11
11
2. Aprete la bombilla para aumentar la presión en el brazalete de brazo.
Lapantalla mostrará la lectura de la presión dentro del brazalete.
Continúebombeando hasta que la presión alcance aproximadamente
50~60mmHg sobre su presión sistólica normal.
Si la presión en el brazalete no estuviera lo suficientemente alta, una flecha
hacia arriba ( ) aparecerá a la vista para avisarleque usted debe seguir
bombeando.
3. Siéntese quieto y espere hasta que el brazalete se desinfle y mida su presión
arterial. Es importante que se mantenga usted quieto y tranquilo durante
lamedición. Cualquier movimiento marcado puede afectar los resultados
dela medición.
4. Cuando el monitor complete su medición, automáticamente mostrará y
almacenará su lectura sistólica, la diastólica y el pulso dentro de la memoria.
Las últimas60 lecturas de medición se almacenarán dentro de la memoria.
La pantalla indicará una flecha hacia abajo ( ). Siga presionando
laválvula de desfogue de aire sobre la bombilla hasta que toda la presión
delbrazalete se haya desinflado.
5. Presione el botón POWERpara apagar la unidad. La unidad se apagará
automáticamente después de un minuto si es que no se presiona ningún botón.
7630 01 Text Eng y Español 20-06-2002 16:58 Page 20