7.Attach the Seat Carriage (11) to the Seat Frame
(27) using four Zinc M8 x 40mm Carriage Bolts (82), four 5/16Ó Black Flat Washers (57), and four M8 Nylon Locknuts (56).
Note: The four Zinc M8 x 40mm Carriage Bolts
(82)used in this step are packaged separately from the other hardware. The four black M8 x 40mm Carriage Bolts (24) contained in the hard- ware pack should be discarded.
8.Attach the Seat (7) to the Seat Frame (27) with four 1/4Ó x 5/8Ó Hex Screws (29) and four 5/16Ó Black Flat Washers (57).
9.Attach the Backrest (13) to the Seat Frame (27) with four 1/4Ó x 1 1/2Ó Hex Screws (73) and four 5/16Ó Black Flat Washers (57).
8
7 |
|
| 82 |
| 27 |
| 11 |
| 57 |
| 57 |
| 56 |
| 56 |
8 |
|
| 7 |
| 27 |
| 57 |
| 57 |
| 29 |
9 |
|
13 | 27 |
| 57 |
| 73 |
| 57 |
| 73 |
