Hearth and Home Technologies 299-900D manual Approvals, Introduction, Preliminary Preparation

Heat-Zone-240V Air Duct Kit

INSTALLATION AND

OPERATION INSTRUCTIONS

Hearth Technologies, Inc.

7571 215th Street West

Lakeville, MN 55044 USA

Approvals

The HEAT-ZONE-240V air duct kit is approved for use on Heat & Glo Models XLR-AU, 6000, 350 and 550 series gas heaters.

Introduction

The HEAT-ZONE-240V accessory kit conveys warm air from the heater through air duct(s) to remote locations in the same room or other rooms of the building. See Figures 1 and 2. One or two HEAT-ZONE-240V kits can be installed on the heater.

Preliminary Preparation

1. Contents of kit:

•6 meters of 152 mm round duct

•Fan housing assembly

•Junction box

•Air register

•Register adapter frame

•Heater duct collar

•Duct adapter - (round to oval)

•Hardware

•2166-191 IPI Plus auxiliary jumper

NOTICE! If any parts are missing or damaged, contact your dealer before starting installation. DO NOT install a damaged kit.

Possible Air Duct Runs/Locations
	CEILING REGISTER
WALL REGISTER
	TWO DUCT KITS
FLOOR REGISTER
WALL REGISTER	WALL REGISTER
Figure 1
Hearth & Home Technologies • Heat-Zone-240V Air Duct Kit • 299-900D • 7/10		1