R E W | Hearth and Home Technologies 8040 04-28-04 specification

the cleaner to penetrate rather than running off the surface of the glass. Wipe the cleaner off with a soft cloth, or black & white newsprint.

Important: scratching or etching the glass will weaken the integrity of the glass. Do not use a razor blade, steel wool, or any other abrasive material to clean the glass. Use low alkaline content cleaners only.

The front door glass is a ceramic, shock-resistant glass, made specifically for use in woodstoves. Do not use any replacement glass other than the ceramic glass manufactured and supplied for use in this woodstove.

3 / 8 " R O P E

Replacement glass is available through your local dealer.

The door glass should be replaced immediately if broken or chipped. Contact your local dealer for replacement glass, which is accompanied with instructions and everything needed for the repair. If you replace the glass yourself, wear work gloves and safety glasses.

The procedure for glass and glass gasket replacement is as follows:

1.	Remove the door by lifting it straight up off the
	hinges with the hinge pins remaining in the door.
2.	Place the door face down on a flat, smooth surface,

S C R E W

G L A S S

C L I P

P A D

G A S K E T

G L A S S C L I P

	other than the floor, with the handle hanging over
	the edge.
3.	Apply penetrating oil to the screws in the glass
	retainer clips. Remove the screws to separate the
	glass from the door.
4.	Carefully lift the damaged glass and/or old gasket
	from the door frame and discard.
5.	Peel the paper backing from the tape gasket.
	Apply the new gasket to the door frame as
	illustrated on page 17.
6.	Place the gasketed glass onto the door. Place a
	new clip and gasket square around the glass, and
	over the screw holes in the clip.
7.	Screw the glass retainer clips (6) back on the door.
8.	Install the door.