11 Installation of Molded Brick Panel

A. Install Hearth Molded Brick Panel

Place hearth panel into the fireplace.

B. Install Back Molded Brick Panel/Traditional

Remove screen rods

Remove the smokeshield

Refer to Figure 11.1.

Set the grate brackets in place, 26.5 in. (673 mm) center to center.

Install the back panel. Center from side to side.

Install two Z-brackets in the mortar lines across the top. Tighten these and all previously installed brackets.

C. Install Side Molded Brick Panel/Traditional

If a gas line is to be installed, remove the knockouts in the inner firebox and in the outer shell on the side of your choice. Refer to dimension drawings for location of knockouts and Section 13.A. for gas provisions.

Install side panel, tapered edge to the front. Align the front edge with the front of the column (or butted to the surround if installed).

Install two Z-brackets in the mortar lines across the top. Tighten these and all previously installed brackets.

Install second side panel following the steps above.

Replace the smokeshield.

Back Traditional Refractory

LH Traditional Refractory

Refractory Clip

Hearth

Figure 11.1 Traditional Molded Brick Panel

38

Heatilator • Birmingham BIR42-B4059-681 • 11/11

Page 38
Image 38
Hearth and Home Technologies BIR42-B owner manual Installation of Molded Brick Panel, Install Hearth Molded Brick Panel

BIR42-B specifications

Hearth and Home Technologies has consistently set the standard for modern heating solutions, and the BIR42-B gas fireplace is no exception. This model stands out for its blend of elegance, efficiency, and technology, making it a highly sought-after choice for homeowners looking to elevate their living spaces.

The BIR42-B features a sleek, contemporary design that seamlessly fits into various decor styles. Measuring 42 inches in width, it provides a generous viewing area to enjoy the mesmerizing flames while adding a focal point to the room. The fireplace comes with a choice of high-quality finishes, allowing homeowners to customize it to their aesthetic preferences.

One of the main features of the BIR42-B is its advanced heating capabilities. With an impressive BTU output, it efficiently warms spaces, making it perfect for both small and large rooms. This model is equipped with a design that maximizes heat circulation, ensuring that warmth is evenly distributed throughout the space.

The BIR42-B also incorporates innovative technologies that enhance user experience. The fireplace comes with a user-friendly remote control, allowing homeowners to adjust flame height and heat settings from the comfort of their seat. This is particularly useful for those chilly evenings when a quick adjustment can make all the difference.

Safety is a primary concern when it comes to heating appliances, and Hearth and Home Technologies has gone the extra mile with the BIR42-B. The unit includes safety features such as an automatic shut-off system and thermal sensors, ensuring peace of mind for users and their families.

Another impressive characteristic is the fireplace's clean-burning technology, which not only adheres to environmental standards but also promotes better air quality inside the home. The BIR42-B is designed to minimize emissions, making it an eco-conscious choice for homeowners.

In summary, the BIR42-B by Hearth and Home Technologies is a top-tier gas fireplace that expertly combines style, functionality, and safety. With its modern design, advanced heating capabilities, user-friendly features, and commitment to environmental responsibility, it stands as an excellent investment for those looking to enhance their home’s ambiance and comfort. This model not only promises warmth but also becomes a central element of design and leisure in any living space.